Services

From concept design to final delivery, we offer a comprehensive range of engineering, fabrication, construction, and workforce resourcing services to meet your project needs.

Engineering Solutions

Our multidisciplinary engineering team delivers technically sound, safe, and cost-effective solutions across every project stage. We work closely with clients across industries including mining, oil & gas, energy, manufacturing, and water/wastewater, ensuring that every electrical solution aligns with project requirements, operational safety standards, and long-term maintainability.

Our Electrical Engineering team delivers robust and fully integrated power and control system designs that meet the complex demands of modern industrial and infrastructure environments. We specialise in end-to-end electrical engineering solutions—from concept development and detailed design to analysis, documentation, and commissioning support. Our focus is on delivering safe, technically compliant, and cost-effective systems that perform reliably under real-world conditions.

Core Capabilities:

Detailed earth grid design and earthing systems
Equipment sizing, specification, and selection for protection relays, cabling, switchgear, transformers, UPS, generators, battery banks and chargers, and lighting systems
Electrical supply systems for materials handling and heat tracing
Design and delivery of transportable switchrooms
Power system modelling and analysis using tools like ETAP and DIgSILENT, covering load flow, short-circuit, motor start/reacceleration, power factor correction, and voltage drop assessments
Arc flash studies, relay setting and grading calculations for transmission and distribution networks, and comprehensive protective relay coordination
Power quality analysis and mitigation strategies
Hazardous area assessments, classification, design drawings, equipment selection, and dossier preparation
Production of 2D AutoCAD and 3D PDMS electrical design drawings
instrument selection, panel and marshalling design, cause-and-effect mapping, preparation of functional specifications, SCADA/HMI screen creation, PLC programming, and loop diagrams.

Our Mechanical and Piping Engineering team delivers safe, functional, and efficient designs for mechanical systems and process piping. We focus on performance, maintainability, and compliance across all stages of design, ensuring reliable operation under varying conditions.

From 3D modelling and equipment specification to stress analysis and fabrication documentation, our services cover both standalone systems and integrated mechanical packages. We work closely with clients to align our designs with practical site constraints and project-specific requirements.

Core Capabilities:

Design and specification of mechanical equipment, including pumps, compressors, heat exchangers, pressure vessels, and storage tanks
3D piping modelling and isometric drawing production for detailed fabrication and installation
Piping layout design with consideration for accessibility, support, expansion, and future maintenance
Pipe stress and surge analysis to assess flexibility, support loading, and compliance with relevant codes
Design of fuel systems, compressed air, steam, cooling water, and other utility lines
Firefighting, foam suppression, and deluge system layout and specification
Materials selection for piping and mechanical components (carbon steel, stainless steel, HDPE, and alloys)
Modular design and skid-based mechanical systems for off-site fabrication and ease of installation
Support during fabrication, installation, testing, and commissioning phases

Our Civil and Structural Engineering team provides practical, compliant, and cost-effective solutions across a wide range of project requirements. We focus on delivering robust and efficient designs that align with site constraints, operational needs, and long-term performance goals.

From structural frameworks and concrete foundations to drainage systems and access infrastructure, our team ensures each element is engineered for safety, durability, and ease of construction. Whether for new developments or modifications to existing assets, we provide detailed support from concept through to construction.

Core Capabilities:

Design of steel and reinforced concrete structures, including pipe racks, access platforms, and support frames
Foundation and floor slab design based on geotechnical and loading requirements
Structural assessments, remediation strategies, and retrofit design for existing structures
Stormwater drainage systems, including swales, culverts, sumps, and underground piping
Design of roads, hardstands, and paved areas for light and heavy vehicle access
Retaining walls, trench systems, and containment bunds
Bulk earthworks and site grading design
Construction support, site inspections, and as-built verification
Preparation of detailed design documentation and engineering reports for construction

Our Process Engineering team delivers practical, efficient, and safety-driven designs for fluid and thermal systems. We focus on optimising performance while ensuring compliance with regulatory standards, operational requirements, and design constraints.

From early-phase process definition to detailed simulation and equipment specification, we support each step of the process design lifecycle. Our engineers work closely with other disciplines to ensure seamless integration with mechanical, electrical, and control systems.

Core Capabilities:

Development of Process Flow Diagrams (PFDs) and Piping & Instrumentation Diagrams (P&IDs)
Mass and energy balance calculations for steady-state and dynamic conditions
Process simulation using recognised software tools for optimisation and equipment sizing
Specification of process equipment, including tanks, pumps, valves, exchangers, and instrumentation
Design of fluid systems including water, fuel, slurry, chemical dosing, and compressed gases
Relief system design and sizing, including pressure safety valve calculations
Facilitation and documentation of HAZOP, HAZID, and risk assessments
Utility consumption analysis and optimisation
Commissioning support, functional testing, and process validation

Our Project Engineering and Management team provides end-to-end delivery solutions tailored to the specific needs of industrial, infrastructure, and resource-sector projects. With a multidisciplinary background and a strong technical foundation, we ensure that every phase of the project, from concept development through to commissioning, is executed with precision, transparency, and efficiency.

We offer flexible support, whether acting as the client’s representative, managing external contractors, or integrating with internal project teams. Our focus is on proactive planning, clear communication, and risk-based decision-making to keep projects on time, within budget, and fully aligned with stakeholder expectations.

Core Capabilities:

Front-end engineering design (FEED), feasibility studies, and project scoping
Budget development, cost estimating, and schedule planning
Procurement strategy and support, including tender preparation and evaluation
Construction coordination, contractor supervision, and technical interface management
Stakeholder engagement and progress reporting
Commissioning, planning and execution oversight
Risk assessment, control, and mitigation planning
Quality, safety, and environmental compliance integration
Post-project review, lessons learned, and close-out reporting

Our drafting and 3D modelling team delivers high-quality design outputs to support all project phases. Using industry-leading software such as AutoCAD, CADWorx, PDMS, Navisworks, and other CAD platforms, we produce accurate drawings, models, and visualisations for engineering, fabrication, and site execution.

Core Capabilities:

Production of 2D drawings and detailed drafting packages for all disciplines
Development of intelligent 3D models for visualisation and clash detection
Conversion of point cloud data from 3D scanning into fully coordinated as-built models
Generation of fabrication drawings, schematics, and P&IDs using AutoCAD and CADWorx
Integration with PDMS, BIM, and other platforms for multi-discipline designs
Support for design reviews, stakeholder presentations, and client approvals

Fabrication Services

Our fabrication team delivers high-quality, code-compliant assemblies and modular systems tailored to your project requirements. With extensive experience in metalwork, welding, module construction, and on-site integration, we ensure every component is built to specification, tested for integrity, and delivered on time.

From workshop fabrication to on-site welding and assembly, our focus is on quality, safety, and reliability, so your systems are ready to perform from day one.

We fabricate pipework in carbon steel, stainless steel, and various alloys across all schedules and diameters. Each spool is built under stringent QA/QC conditions to meet exact project specifications.

Core Capabilities:

Fabrication of pipe spools in carbon steel, stainless, duplex, and alloys
Coded welding to ASME and AS/NZS procedures (TIG, MIG, Stick)
Weld mapping, traceability, and documentation
End preparation: bevelling, threading, facing
Isometric-based fabrication and dimensional control
Pre-assembly fit-up for routing or skid integration
QA turnover packs and fabrication records

Our controlled workshop environment enables high-quality welding and mechanical assembly. We manage integration of all structural, piping, and equipment components.

Core Capabilities:

Structural and pressure-rated welding
Spool fit-up, bolting, flange alignment, and fastening
Assembly of supports, brackets, and mechanical hardware
Hydrostatic testing with certified pressure reports
Visual inspection, weld documentation, and ITP sign-off
Final packaging and preparation for delivery

We build structural elements including skids, frames, platforms, access structures, and equipment supports, fabricated to engineering drawings and tolerances.

Core Capabilities:

Fabrication of steel structures, platforms, supports, and walkways
Cutting, drilling, welding, and component assembly
Surface treatment: hot-dip galvanising, industrial coatings
Fabrication of transport frames, lifting lugs, and bracing
Integration of mechanical/piping interfaces
Dimensional and alignment checks
Drawing-based fabrication documentation

We provide electrical panel fabrication and wiring services for LV & distribution boards, control panels, and instrumentation cabinets, ensuring every panel is assembled, wired, and tested to spec.

Core Capabilities:

Fabrication of LV panels, DBs, and control panels
Gland plate cutting, drilling, and enclosure preparation
Installation of DIN rail components, busbars, relays, and terminal blocks
Control panel layout based on schematics and wiring diagrams
Cable termination, wire tagging, and point-to-point testing
Insulation resistance and continuity checks
FAT support and final labelling/documentation

We manage the transition from workshop fabrication to installation, while ensuring every component is inspected, documented, and ready for operation. Our approach blends hands-on construction support with robust QA/QC processes to ensure safe, efficient, and compliant project delivery.

Core Capabilities:

Coordination of fabricated packages, drawings, and delivery plans
Lift planning, rigging coordination, and transport logistics
Supervision of structural or mechanical installation teams
Interface management between fabrication and construction contractors
Construction schedule monitoring and QA/QC coordination
Safety and compliance tracking during installation phase
QA/QC audits of welding, assembly, and coating processes
Visual and dimensional inspections of fabricated components
Witnessing of hydrostatic pressure testing and electrical checks
Factory Acceptance Testing (FAT) facilitation and punch list resolution
Final walkdown, tagging, and handover documentation
Verification of surface treatments and compliance with ITPs

Personnel Outsourcing

We provide skilled personnel and flexible workforce solutions to support every stage of your project, from planning and execution to shutdowns and maintenance. Our approach is built on responsiveness, capability, and alignment with your team’s culture, safety standards, and technical requirements.

Whether you need a fully embedded engineer, trades support for critical shutdowns, or ongoing project resourcing, we tailor our workforce offering to meet your operational and delivery goals.

We supply qualified professionals across engineering disciplines, project management, and site supervision. Our seconded personnel integrate seamlessly with your team to support planning, execution, and delivery.

Core Capabilities:

Placement of electrical, mechanical, civil, structural, process, and instrumentation engineers
Provision of project managers, construction managers, supervisors, and client representatives
Flexible contracts: short-term, long-term, or project-specific secondments
Personnel with verified qualifications, licences, and compliance documentation
Onboarding assistance and role integration support
Site mobilisation, coordination and safety induction readiness
Performance review and ongoing support throughout engagement

We work with clients to strategically plan resourcing for projects and operations—ensuring the right people are available at the right time to keep progress moving and risks low.

Core Capabilities:

Labour demand forecasting and mobilisation scheduling
Workforce planning for shutdowns, outages, and commissioning phases
Resourcing matrix and competency mapping
Customised recruitment campaigns for specialised roles
Coordination of interviews, onboarding, and compliance paperwork
Performance monitoring and issue resolution
Safety, cultural, and team-fit screening

We provide experienced trades and site labour to support construction, shutdowns, maintenance, and fabrication activities. All personnel are selected based on capability, reliability, and safety focus.

Core Capabilities:

Supply of welders, pipe fitters, boilermakers, mechanical fitters, riggers, and electricians
Availability for daywork, nightshift, weekend, or shutdown rosters
Pre-screened and verified trade qualifications and certifications
Site readiness including inductions, PPE, and medicals
Support for rapid mobilisation and high-volume workforce ramp-up
Labour supervision and time-tracking coordination
Integration with client tools, procedures, and safety systems

3D Scanning

We provide high-accuracy 3D laser scanning and digital measurement services to support design, verification, and fabrication workflows. By capturing highly accurate, detailed point-cloud data of existing conditions, we can produce precise as-built models that reflect even complex geometries and hard-to-measure areas.

This reduces assumptions and manual measurement errors, ensuring excellent fit-up between new designs and existing structures. It also enables early clash detection at the design stage, reducing rework and construction delays. Additionally, 3D scanning improves collaboration by providing clear visual references for all stakeholders, streamlining approvals, and supporting integration and documentation.

Core Capabilities:

High-resolution 3D laser scanning of assets and infrastructure
Full point-cloud capture for brownfield and greenfield environments
Multi-angle scan registration for complete spatial coverage
Accurate measurements for reverse engineering and retrofits
Production of 2D drawings, orthophotos, and as-built 3D models
Seamless integration with AutoCAD, Revit, Navisworks, and other design platforms
Early clash detection and spatial validation for new installations
As-built verification and dimensional checks prior to fabrication
Digital site walkthroughs to support remote design teams
Flexible export formats, including RCP, E57, LAS, and more

Site Services

Our site services team provides end-to-end support for installation, construction, commissioning, and maintenance activities. Whether it’s a new system rollout, plant upgrade, or brownfield integration, we bring skilled people, proven systems, and disciplined execution directly to your site.

With a focus on safety, quality, and coordination, we ensure every phase of site execution is aligned with your goals and delivered to the highest standard.

We manage the full mechanical, piping, structural, and electrical installation of systems and equipment in line with design specifications and site constraints.

Core Capabilities:

Installation of piping, skids, supports, and structural steel
Mechanical equipment setting, alignment, and levelling
Electrical panel mounting, cable ladder installation, and termination
Bolt-up, torqueing, and QA sign-off
Installation of cable trays, instrument tubing, and junction boxes
Coordination with fabrication drawings and layout models
Site supervision and interface management

We support mechanical, electrical, civil and process commissioning activities, ensuring every system is tested, functional, and ready for handover.

Core Capabilities:

Mechanical and piping system pressure/leak testing
Electrical continuity and insulation resistance checks
Pre-startup safety inspections and punch list closure
Loop checking, calibration, and instrument verification
Start-up support for pumps, motors, and rotating equipment
Commissioning documentation and sign-off packs
Coordination with engineering and operations teams

We provide construction services for greenfield builds, brownfield tie-ins, upgrades, and infrastructure works—delivered with schedule control and safety discipline.

Core Capabilities:

Management of site works, subcontractors, and trades
Civil, mechanical, and structural installation coordination
Equipment foundations, supports, and alignment
Routing of process and utility systems
Lift planning, cranage coordination, and rigging
Daily reporting, construction progress tracking, and HSE compliance
Integration of ITPs, method statements, and work packs

We offer integrated site support services to assist with shutdowns, maintenance, retrofit work, and project delivery—all performed by qualified, safety-trained personnel.

Core Capabilities:

Site measurement, verification, and mark-up for retrofit and tie-ins
Shutdown execution support (mechanical, piping, electrical)
Hot work, confined space entry, and permit-controlled activities
Troubleshooting, field engineering, and technical support
As-built redlines, updates, and post-installation reporting
Labour and supervision for maintenance or ad hoc field tasks
Coordination of temporary services and site logistics

Services

Engineering Solutions

Core Capabilities:

Core Capabilities:

Core Capabilities:

Core Capabilities:

Core Capabilities:

Core Capabilities:

Fabrication Services

Core Capabilities:

Personnel Outsourcing

Core Capabilities:

3D Scanning

Core Capabilities:

Site Services

Core Capabilities:

QUICK LINKS

HEAD OFFICE

WORKSHOP

FOLLOW US

Services

Engineering Solutions

Core Capabilities:

​

Fabrication Services

Core Capabilities:

​

Personnel Outsourcing

Core Capabilities:

​

3D Scanning

Core Capabilities:

​

Site Services

Core Capabilities:

​

QUICK LINKS

HEAD OFFICE

WORKSHOP

FOLLOW US